Lantronix XPort AR - Manual (Page 44)

6: Line and Tunnel Settings
XPort AR User Guide 44
1. Click Tunnel 1 > Accept Mode. Figure 6-9 shows the page displays.
Figure 6-9 Tunnel 1 Accept Mode Web Page
2. Enter or modify the fields in Table 6-6 .
Table 6-6 Tunnel Accept Mode Fields
Field Description
Mode Select the method used to start a tunnel in Accept mode. Choices are:
 Disabled—Do not accept an incoming connection.
 Always—Accept an incoming connection. (default)
 Any Character—Start waiting for an incoming connection when any
character is read on the serial line.
 Start Character—Start waiting for an incoming connection when the
start character for the selected tunnel is read on the serial line.
 Modem Control Asserted—Start waiting for an incoming connection
as long as the Modem Control pin (DSR) is asserted on the serial line
until a connection is made.
 Modem Emulation—Start waiting for an incoming connection when
triggered by modem emulation AT commands. Connect mode must also
be set to Modem Emulation.