Lantronix XPort AR - Manual (Page 34)

6: Line and Tunnel Settings
XPort AR User Guide 34
1. Click Line > Line 1 > Configuration. Line 2 has the same fields as Line 1. Figure 6-2 shows
the page that displays.
Figure 6-2 Line 1 Configuration Web Page
2. Enter or modify the fields in Table 6-1 .
Table 6-1 Line 1 Configuration Fields
Field Description
Name Enter a name for the line.
State Indicates whether the current line is enabled. To change the status, select
Enabled or Disabled from the drop-down menu.
Protocol Select the protocol from the drop-down menu. The default is Tunnel.
Note: All protocols work in Connect and Accept Mode except the LPD or
Tunnel protocol option which is supported only in Accept Mode.
Baud Rate Select the baud rate from the drop-down menu. The default is 9600.
Parity Select the parity from the drop-down menu. The default is None.
Data Bits Select the number of data bits from the drop-down menu. The default is 8.
Stop Bits Select the number of stop bits from the drop-down menu. The default is 1.