Lantronix XPort AR - Manual (Page 73)

9: Services Settings
XPort AR User Guide 73
2. Enter or modify the fields in Table 9-4 .
Syslog
In the Syslog web page, you can configure settings, and view statistics and status. To configure
the Syslog, perform the following steps.
Note: The Syslog file gets saved to lRAM and gets discarded when the XPort AR
reboots. Saving the Syslog file to a server that supports remote logging services (see RFC
3164) allows the administrator to save the complete Syslog history. The default port is
514.
1. Click Syslog on the Main Menu. Figure 9-6 shows the page that displays.
Table 9-4 TFTP Server Fields
Field Description
State Select Enabled to enable the TFTP server.
Allow File Creation Select whether to allow the creation of new files stored on the TFTP server.
Allow Firmware Update Specifies whether or not the TFTP Server is allowed to accept a firmware
update for the device. An attempt to update firmware is recognized based on
the name of the file.
Note: TFTP cannot authenticate the client so the device is open to
malicious updates.
Allow XCR Import Specifies whether or not the TFTP server is allowed to accept an XML
configuration file for update. An attempt to import the configuration is
recognized based on the name of the file.
Note: TFTP cannot authenticate the client so the device is open to
malicious updates.