Lantronix XPort AR - Manual (Page 50)

6: Line and Tunnel Settings
XPort AR User Guide 50
Disconnect Mode
Disconnect Mode ends Accept Mode and Connect Mode connections. It runs in the background of
an active connection to determine when to disconnect. When disconnecting, the XPort AR shuts
down connections gracefully. The following settings end a connection:
 Stop character received.
 Timeout period elapsed and no activity. Both Accept Mode and Connect Mode must be idle for
a specified time frame.
 Modem control inactive setting.
Note: To clear data out of the serial buffers upon a disconnect, enable “Flush Serial
Data”.
To configure Disconnect Mode, perform the following steps.
1. Click Tunnel 1 > Disconnect Mode. Figure 6-11 shows the page that displays.
Figure 6-11 Tunnel 1 Disconnect Mode Web Page