Lantronix XPort AR User Manual
Page 99
11: Maintenance and Diagnostics Settings
XPort AR User Guide
99
3.
Click Submit.
IP
To change the IP settings, perform the following steps.
1.
Click Protocol Stack > IP.
shows the page that displays.
Figure 11-4 IP Web Page
Ack Limit
Enter a number to limit how many packets get received before an ACK gets
forced. If there is a large amount of data to acknowledge, an ACK gets
forced. If the sender TCP implementation waits for an ACK before sending
more data even though the window is open, setting the Ack Limit to 1
packet improves performance by forcing immediate acknowledgements.
Send Data
The Send Data selection governs when data may be sent into the network.
The Standard implementation waits for an ACK before sending a packet less
than the maximum length. Select Expedited to send data whenever the
window allows it.
Table 11-2 TCP Fields (continued)
Field
Description