Lantronix XPort AR - Manual (Page 47)

6: Line and Tunnel Settings
XPort AR User Guide 47
1. Select Tunnel 1 > Connect Mode. Figure 6-10 shows the page that displays.
Figure 6-10 Tunnel 1 Connect Mode Page
2. Enter or modify the fields in Table 6-7 .
Table 6-7 Tunnel 1 Connect Mode Fields
Field Description
Mode Select the method to be used to attempt a connection to a remote host or
device. Choices are:
 Always—A connection is attempted until one is made. If the connection
gets disconnected, the XPort AR retries until it makes a connection.
(default)
 Disable—An outgoing connection is never attempted.
 Any Character—A connection is attempted when any character is read
on the serial line.
 Start Character—A connection is attempted when the start character
for the selected tunnel is read on the serial line.