Lantronix XPort AR - Manual (Page 98)

11: Maintenance and Diagnostics Settings
XPort AR User Guide 98
Protocol Stack
In the Protocol Stack web page, you can configure TCP, IP, ICMP, and ARP.
TCP
To configure the network protocols, perform the following steps.
1. Click Protocol Stack on the Main Menu. TCP is the default. Figure 11-3 shows the page that
displays.
Figure 11-3 TCP Web Page
2. Enter or modify the fields in Table 11-2 .
Table 11-2 TCP Fields
Field Description
Send RSTs Click Enabled to send RSTs or Disabled to stop sending RSTs. TCP
contains six control bits, with one or more defined in each packet. RST is one
of the control bits. The RST bit is responsible for telling the receiving TCP
stack to end a connection immediately.
Caution: Setting the RSTs may pose a security risk.