Paxar Monarch TCMPCL2PR - Manual (Page 100)

For example, you can use "" or ~034 to print the " character in
your batch data. Use ~~ to print the ~ character in your batch
data; otherwise, the tilde characters is ignored. You can also
use ~XXX where XXX is the decimal equivalent or an
unprintable character.
Sample Batch Data with Special Characters
{B,1,N,1 p Decimal Character What Prints
1,"123~034456789" p ~034 is " 123"456789
2,"~094983~‘126LG4451" p ~094 is ^
~126 is ~ ^983~‘LG4451
Merged or Sub-Fields
If a field is completely filled by data copied from other fields,
use quotation marks without spaces between them for the
"data string" parameter.
Incrementing Fields
In incrementing fields, the first number in the sequence must
contain the same number of digits as the highest number to be
counted. For example, to increment the numbers in a field
from 1 to 999, enter the starting number in the batch as 001.
Downloading Methods ––––––––––––––––––––––––––––––––––––––
Depending on your application, you can download the format
and batch data using one of three methods: sequential
method, batch method, batch quantity zero method.
Sequential Method
Using the sequential method, you send all your format and
batch data at one time. Use this method when your
application does not require operator intervention to input
data. All data is sent down at one time, and the printer then
images each field. As soon as the last field is imaged, your
labels begin to print.
MPCLII Packet Reference Manual
6-6