Paxar Monarch TCMPCL2PR - Manual (Page 98)

Defining the Batch Control Field––––––––––––––––––––––––––––––
The batch header must precede this field. The batch control
field defines the print job and applies only to the batch that
immediately follows.
Syntax E,feed_mode,batch_sep,print_mult,
multi_part,cut_type,cut_mult
p
E1. E Batch Control Field.
E2. feed_mode Feed Mode. Options:
0 Continuous Feed (9494/9490/9446)
1 On-demand
2 Internal rewind (9446)
E3. batch_sep Batch Separator (striped label in between batches).
Options:
0 Does not print a separator
1 Prints a separator (9494/9490/9446)
E4. print_mult Number of tags with the same image.
1 to 999
E5. multi_part Number of identical parts on one tag.
1 to 5
E6. cut_type 0 is the only valid option.
E7. cut_mult 0 is the only valid option.
Example E,0,1,4,2,0,0
p
Defines a batch control field. Continuous feed mode is used
and a separator prints between batches. Four tags have the
same image and there are two identical parts on one tag. The
last two parameters are 0, because a knife is not available on
these priners.
MPCLII Packet Reference Manual
6-4