Paxar Monarch TCMPCL2PR - Manual (Page 138)

Error
Code Description
575 The graphic included in your format could not be
found.
600 Imaging error because the batch was refused.
Resend the batch. If the error persists, call
Technical Support.
601 An error occurred while the batch was imaging.
Resend the batch. If the error persists, call
Technical Support.
602 The batch was not found during imaging. Resend
the batch. If the error persists, call Technical
Support.
611 Font, bar code or density is invalid. The font, bar
code or density in the batch does not fit the format.
612 The data in this line of the batch is either missing or
does not match the format.
613 Reference point off tag.
614 Portion of field off tag. There may be an invalid
character in the packet. Make sure you did not
enter O for 0.
615 Bar code width is greater than 16 inches or the
number of keywords for your PDF 417 bar code
exceeds 928. Decrease the density or shorten the
amount of data to print the bar code.
616 A bad dot falls on a bar code and the dot cannot be
shifted. Call Technical Support.
618 Magnification must be 1 to 7 or 4 to 90 (point size)
for the scalable font. The range with the scalable
font on the 9490 printer is 4 to 200 points.
MPCLII Packet Reference Manual
9-16