Paxar Monarch TCMPCL2PR - Manual (Page 26)

This is the syntax to use when you create online configuration
packets:
Syntax
{ Start of Header
I, Configuration Header
1 to 7 optional packets
A, parameter 1...parameter 5
p System Setup
B, parameter 1...parameter 5
p Supply Setup
C, parameter 1...parameter 5
p Print Control
D, parameter 1...parameter 3
p Monetary Formatting
E, parameter 1...parameter 9
p Control Characters
F, parameter 1...parameter 5
p Communication Settings
M, paramater 1...parameter 4
p Memory Configuration
} End of Header
Syntax for single packet
{ Start of Header
I, Configuration Packet Identifier
A, parameter 1...parameter 5 System Setup
} End of Header
Configuration Syntax Guidelines
When creating a printer configuration packet:
✦ Follow the "Standard Syntax Guidelines" listed at the
beginning of this chapter.
✦ Begin a packet with the configuration header (I).
✦ Download multiple configuration packets within one
packet or download a single configuration packet.
✦ If you change ANY of the online configuration packets,
resend the format packet to the printer, so the
configuration changes take effect.
✦ Include the first five ANSI codes, at a minimum, in the
control characters packet.
✦ Make sure the host settings match the settings
contained in the communication settings packet.
✦ Record the new configuration for future reference.
MPCLII Packet Reference Manual
3-6