Paxar Monarch TCMPCL2PR - Manual (Page 39)

Use the formula below to calculate the
required image buffer size.
19.13K x Length
Length is the length of your label in inches.
Example 19.13K x 6 = 114.78K
(Multiply by 10 and round up.)
114.78K x 10 = 1147.8
1147.8 = 1150
Enter 1150 for your Image buffer.
Format Buffer Used to store formats, batch data, and
graphics. A minimum of 160 is required.
The maximum is 2295. Use the following
formula to calculate the required format
buffer size:
Linecount x 50/1024
Linecount is the number of lines in your
format packet including the format header
and all the options.
The result of the above calculation is in
kilobytes.
Downloadable
Fonts Buffer Used to store downloaded soft
(bitmapped) fonts. A minimum of 80 is
required. The maximum is 2295. To
determine the size of your downloadable
fonts, send a font packet. See "Using the
Font Packet" for more information.
Chapter 3. Configuring the Printer
3-19