Paxar Monarch TCMPCL2PR - Manual (Page 198)

Appendix E. Addressing a 9490 Printer
This appendix describes how to print supplies from a 9490
printer used with the Monarch® 9476
 Mobile Printing Station.
The Station allows multiple printers to share a common
communication cable.
To use an individual printer on the Station, you must
✦ Define a unique address for each printer.
✦ Select a printer.
✦ Send format and batch packets to the selected printer.
Addressing the Printer –––––––––––––––––––––––––––––––––––––––
These steps describe how to address printers that share a
common communication cable.
Step 1. Define the Printer Address
You can define or change a printer address by sending the
communication settings packet. Make sure you assign a
unique address to each printer.
n
✦ Turn off all the printers except the one you want to address.
✦ Do not assign 000000 as a printer address.
Syntax { I,F,baud,word_length,stop_bits,parity,
flow_control,pr_address
p }
See "Defining the Communication Settings Packet" in Chapter
3 for more information.
E-1