Paxar Monarch TCMPCL2PR - Manual (Page 37)

✦ Buffers must total 256K, or 512K if the Optional RAM is
present.
✦ "Optional RAM Buffer Sizes" lists the minimum and
maximum values for each buffer using the Optional RAM.
Checking Current Buffer Sizes
Send a configuration upload packet to check the sizes of your
current buffers. See "Using Configuration Upload Packet" for
more information. After you check your current buffer sizes
you can begin reallocating memory.
If you want to increase your image buffer and you will not be
using scalable fonts, add that memory into your image buffer.
Example {I,M,R,R,20
p
Receive buffer 2K
M,T,R,10
p
Transmit buffer 1K
M,D,N,80
p
Downloadable fonts 8K
M,V,R,0
p
Scalable fonts buffer 0K
M,I,N,1650
p
Image buffer 165K
}
Make sure memory is available before adding memory to a
buffer. In the above example, if the image buffer (M,I,N,1650)
was defined before the downloadable fonts and scalable fonts
buffers (M,D,N,80 and M,V,R,0) were defined, an error would
have occurred.
Chapter 3. Configuring the Printer
3-17