Paxar Monarch TCMPCL2PR - Manual (Page 12)

3. Type the following bar code field:
B,1,12,F,110,115,1,2,120,5,L,0
p
4. Type the following text field:
T,2,18,V,30,30,1,1,1,1,B,C,0,0,0
p }
You have created a format packet for your MPCLII printer.
Now, a batch packet must be created before you can print the
format.
5. Type the following batch header, after the text field line:
{B,25,N,1
p
6. Type the following bar code data:
1,"12345678901"
p
7. Type the following text field data:
2,"DAYTON, OHIO"
p }
8. Save your file as SAMPLE.FMT.
9. Type MODE COM1:9600,N,8,1 at the DOS prompt if you
are using serial communications. This sets the
communication parameters at your host. These
communication parameters must match those at your
printer. See "Setting Communication Parameters" in
Chapter 3 for more information.
MPCLII Packet Reference Manual
1-4