Paxar Monarch TCMPCL2PR - Manual (Page 143)

Error
Code Description
905 Illegal interrupt.
906 Non-maskable interrupt.
907 Low RAM error.
908 Non Volatile RAM checksum failure.
909 RAM corrupted.
910 Warm restart.
911 Version string mismatch.
931 An error occurred writing to flash memory. Repeat
the flashing procedure.
932 An error occurred writing to RAM. A problem
occurred when the resident loader loaded the
transient loader into RAM. Repeat the flashing
procedure.
933 Communication parity error. The parity values set
do not match. Correct the problem and flash the
printer again.
934 Communication framing error. Verify the cable
connection and that you are using the correct
communication settings.
935 Communication overrun error. One of the buffers is
full and cannot handle more data. Repeat the
flashing procedure.
936 Invalid record type. A communications error
occurred during the flashing procedure. Verify the
cable connection and the communications
parameters being used and repeat the flashing
procedure.
Chapter 9. Errors
9-21