Paxar Monarch TCMPCL2PR - Manual (Page 129)

Error
Code Description
222 Data type restriction is outside the range of 1 to 6.
223 Option is not valid for the field.
224 Bar code Inter-Character Gap must be 1 to 99 in
printer dots. (This is also known as the Additional
Character Gap when using Option 50, Defining Bar
Code Densities.)
251 Online/offline power up mode must be 0 (online) or 1
(offline). (0 is the only valid option for the 9490
printer.) See "Defining the System Setup Packet" in
Chapter 3 for more information.
252 Language selection must be 0 (English), 1 (French),
2 (German), or 3 (Spanish). (0 is the only valid
option for the 9494 and 9490 printers.) See
"Defining the System Setup Packet" in Chapter 3 for
more information.
253 Batch separator code must be 0 (off) or 1 (on). (0 is
the only valid option for the 1460 printer.) See
"Defining the System Setup Packet" in Chapter 3 for
more information.
254 Slash zero selection must be 0 (standard zero) or 1
(slash zero). See "Defining the System Setup
Packet" in Chapter 3 for more information.
255 Supply type must be 0 (black mark), 1 (die cut), or 2
(non-indexed, only valid option for the 9494 printer).
See "Defining the System Setup Packet" in Chapter
3 for more information.
256 Ribbon selection must be 0 (direct), 1 (transfer), or 2
(high energy, only valid option for the 9446 printer).
See "Defining the System Setup Packet" in Chapter
3 for more information.
Chapter 9. Errors
9-7