Paxar Monarch TCMPCL2PR User Manual
Page 104
Example:
E
AB
The status codes (A and B in this case) are ASCII equivalents
to the hexadecimal bits that represent the various types of
status responses. This response indicates that the printer is
online (Character A) and that there is a stock fault (Character
B).
Example:
E
??
Indicates that this is the first ENQ response since the printer
was turned on. Send another ENQ immediately to receive the
printer’s status.
Example:
E
@@
Indicates the printer is offline.
n
On the 1460 printers (Version 3.0 and higher), status byte #3,
bit 3 is "on" as soon as a label is printed and is placed on the
Tamp Pad. The bit is "off" as soon as the Tamp Arm applies
the label. This bit is "on" when the Tamp Arm returns to the
home position and another label is placed onto the Tamp Pad.
The bit is "off" if no label is placed onto the Tamp Pad.
The following graphics can be used as a quick reference for
the Status of Byte #2 and Byte #3. Byte #1 is the
non-printable user-defined ENQ character.
MPCLII Packet Reference Manual
7-2