Paxar Monarch TCMPCL2PR - Manual (Page 80)

Option 4 (Copy Data) –––––––––––––––––––––––––––––––––––––––
You can create a field that uses data from another field. This
is useful for creating merged fields or sub-fields. You can
copy the information from multiple fields into one field by
applying the copy procedure more than once. Copy data is
the only option you can apply to a field more than once.
The maximum number of characters defined in box T3 or B3
must allow for the number of characters you place in the field,
including any price, check digit, or fixed characters inserted by
the printer. The maximum number of characters in the field
into which data is copied cannot exceed 2710 or the maximum
number of characters permitted by the bar code.
n
When copying from more than one field, copy into the
destination field from left to right.
Syntax R,4,src fld,src start,# to copy,dest start,copy
code
p
R1. R Field Option Header.
R2. 4 Option 4.
R3. src fld Field number from which data is copied. Range: 0 - 999.
R4. src start Position number in the source field of the first character to
be copied. Character positions are numbered 1 to 2710,
starting from the left.
R5. # to copy Number of characters to copy. Range: 1 - 2710.
R6. dest start Position number where copied characters are to begin
printing in the destination field. Range: 1 - 2710.
R7. copy code Copy Method.
1 Copy field as is (including price symbols,
pad characters, check digits, etc.).
2 Copy unformatted data (without price characters,
pad characters, etc.).
Example R,4,3,1,3,1,1
p
MPCLII Packet Reference Manual
5-4