Paxar Monarch TCMPCL2PR - Manual (Page 119)

✦ ENQ trailer characters
✦ RS232 trailer characters (these are the trailers for all
communications, except an ENQ.)
n
The ENQ/IMD, MPCL, and RS232 trailer characters can be
user defined through the control characters packet. See
"Defining the Control Characters Packet," in Chapter 3 for
more information.
✦ Code page (symbol set)
✦ Print contrast
✦ Printhead information (printhead rank or resistance in
ohms.)
✦ A Code 128 bar code filled with ASCII zeros for the
1460/9446/9494 printers or the printer’s address for
the 9490 printer.
✦ Test pattern
After you print a test label, the 9494 and 9490 printers are in
"Data Dump" mode. If you do not want to perform a data
dump, press the trigger two times to resume normal printing.
See "Using Data Dump" for more information.
Using Data Dump–––––––––––––––––––––––––––––––––––––––––––
After printing a test label, the 9494 and 9490 printers are in
"data dump mode."
n
To print a test label, you need to disconnect your cable from
the host.
The printer’s LED will flash, alternating amber and green. To
download a data stream to the printer and print it on a label:
1. Press the trigger one time.
2. Reconnect your cable to the host.
3. Download the data stream you wish to "dump" (print out
on a label).
Chapter 8. Diagnostics
8-3