Paxar Monarch TCMPCL2PR - Manual (Page 135)

Error
Code Description
412 There is a problem with flow control between the
printer and the host. Make sure the printer and the
host flow control settings match (both are DTR or
both are XON/XOFF). If the error persists, call
Technical Support.
413 Online receive queue is full. Check your printer’s
XON/XOFF or DTR SETUP values to be sure there
isn’t a flow control problem.
414 The Internal keyboard buffer is full or you need a
new keypad. Call Technical Support.
415 The buffer size you defined exceeds the total
available in your machine. See "Defining the
Memory Configuration Packet" in Chapter 3 for valid
options.
416 An error occurred during the flash writing process.
Call Technical Support.
417 Flash memory is full. Call Technical Support.
418 An error occurred during the flash clearing process.
Call Technical Support.
420 Internal software error relating to uploading. Call
Technical Support.
421 Internal software error relating to location name.
Call Technical Support.
422 Internal software error relating to duplicate name.
Call Technical Support.
423 Internal software error. Call Technical Support.
Chapter 9. Errors
9-13