Paxar Monarch TCMPCL2PR - Manual (Page 140)

Error
Code Description
705 Invalid batch received. Press the trigger or
E to
clear the error. Check the batch data. Resend the
batch. If the error persists, call Technical Support.
750 Printhead is overheated. Turn the printer off to let
the printhead cool. If the error persists, call
Technical Support.
751 Printer did not sense a black mark when expected.
n
For errors 751-753, Check the
✦ supply tracking
✦ supply marks
✦ black mark sensor position
✦ supply roll for binding.
Press the trigger or
E and try to continue
printing. If the error continues to appear, change
the supply.
752 Printer sensed a mark in the wrong place.
753 Printer sensed a mark that is too long.
754 Printer has a ribbon problem. Check the ribbon.
The printer is either out of ribbon or the ribbon is
jammed.
755 Printhead is open. Close the printhead before
continuing. If the error persists, call Technical
Support.
756 The printer is out of supplies. Load supplies.
MPCLII Packet Reference Manual
9-18