Paxar Monarch TCMPCL2PR - Manual (Page 56)

T6. column Distance from the left edge of the print area to the pivot
point is the column location. Ranges:
English 0 - 399
Metric 0 - 1015
Dots 0 - 767
T7. gap Number of dots between characters
(192 dots per inch). Range: 0-99.
NOTE: For monospaced fonts, the additional spacing is
added to the existing inter-character gap. This is
also true for proportionally spaced fonts, but
remember that the inter-character gap varies with
character combinations.
Any number other than 0 or the default number affects
your field width. Default spacing:
Standard 3 dots
Reduced 1 dot
Bold 3 dots
OCRA-like 3 dots
CG Triumvirate Bold varies with each letter
CG Triumvirate varies with each letter
T8. font Style of font. Options:
1
Standard 4 OCRA-like
2 Reduced 10 CG Triumvirate Bold
3 Bold 11 CG Triumvirate
50 CG Triumvirate Bold (scalable)
NOTE: If you have purchased optional fonts, refer to the
Optional Fonts Manual for valid font selectors.
The scalable font (Font #50) must be purchased
separately for the 9446 and 1460 printers. The
scalable font does not print a slashed zero. The
CG Triumvirate fonts and Font #50 support only
the ANSI and DOS Code 437 and 850 Page
Symbol Sets. See Appendix C, "Symbol
Sets/Code Pages" for more information.
T9. hgt mag Height magnifier, 1-7 (times) or 4-90 points for the
scalable font. If using the scalable font on the 9490
printer, the range is 4-200 points. Use a magnifier of 1
with proportionally spaced fonts, because characters lose
smoothness at higher magnifications.
MPCLII Packet Reference Manual
4-4