Paxar Monarch TCMPCL2PR - Manual (Page 130)

Error
Code Description
257 Feed mode must be 0 (continuous), 1 (on-demand),
or 2 (rewind). (1 is the only valid option for the 1460
printer.) See "Defining the System Setup Packet" in
Chapter 3 for more information.
258 Supply position is outside the range. See Chapter
5, "Configuring the Printer," for more information.
259 Contrast adjustment must be -390 to 156.
260 Print adjustment must be -99 to 99.
261 Margin adjustment must be -99 to 99.
262 Speed adjustment is invalid. See "Defining the Print
Control Packet" in Chapter 3 for more information.
263 Primary monetary symbol is invalid. See "Defining
the Monetary Formatting Packet" in Chapter 3 for
more information.
264 Secondary symbol selection must be 0 (none) or 1
(print secondary sign). See "Defining the Monetary
Formatting Packet" in Chapter 3 for more
information.
265 Monetary decimal places must be 0 to 3. See
"Defining the Monetary Formatting Packet" in
Chapter 3 for more information.
266 Character string length in the control characters
packet must be 5 (MPCL control characters) or 7
(ENQ/IMD command character). See "Defining the
Control Characters Packet" in Chapter 3 for more
information.
MPCLII Packet Reference Manual
9-8