Paxar Monarch TCMPCL2PR - Manual (Page 167)

Appendix B. Fonts
This appendix contains information you need to work with
fonts.
Standard Fonts –––––––––––––––––––––––––––––––––––––––––––––
The 9490 printer comes with these fonts loaded in ROM:
Number Font Size and
Appearance
Type of
Spacing
1 Standard Monospaced
2 Reduced Monospaced
3 Bold Monospaced
4 OCRA-like Monospaced
10 CG Triumvirate Bold (9 pt.) Proportional
11 CG Triumvirate (6 pt.) Proportional
50 CG Triumvirate (4-200 pt.) Scalable
n
✦ The scalable font (Font #50) must be purchased separately
for the 9446 and 1460 printers. The point size range is
4-90 pt.
✦ The CG Triumvirate fonts support only the ANSI and DOS
Code Pages symbol sets. The CG Triumvirate fonts print a
slashed zero when using the ANSI symbol set. However,
the scalable font does not print a slashed zero.
Refer to the following pages for illustrations of these fonts.
B-1