Paxar Monarch TCMPCL2PR - Manual (Page 96)

3. Send the communication settings packet to select the
printer’s communication settings. See "Defining the
Communication Settings Packet" in Chapter 3 for more
information. Make sure the settings match those at the
host before sending any packets to the printer.
4. Type this command at the DOS prompt:
COPY LABEL1.FMT COM1
Transmits a file called "L ABEL1.FMT" to COM1.
COPY LABEL1.BCH COM1
Transmits a batch called "L ABEL1.BCH" to COM1.
If you use the COPY command to download your formats, set
flow control to DTR (not XON/XOFF). Also, do not use the
MS-DOS prompt from inside Windows, because you will get a
framing error.
Defining the Batch Header –––––––––––––––––––––––––––––––––––
Batch data is the actual information printed on the supply.
Batch data fills in the format’s text, bar code, and
non-printable text fields.
A batch packet contains three parts:
batch header identifies the format and how many labels
to print.
batch control defines the print job.
batch data
(optional) defines the actual information printed on
the label.
MPCLII Packet Reference Manual
6-2