Paxar Monarch TCMPCL2PR - Manual (Page 127)

Error
Code Description
102 Print quantity is outside the range 1 to 32000.
104 Batch mode must be N (new) or U (update). See
"Defining the Batch Header" in Chapter 6 for more
information.
105 Batch separator must be 0 (off) or 1 (on).
106 Print multiple is outside the range 1 to 999.
107 Cut multiple is outside the range 0 to 999. Only
valid for printers with a knife.
108 Multiple part supply is outside the range 1 to 5.
109 Reserved for knife usage. Only valid for printers
with a knife.
200 Option number must be 1, 4, 30, 31, 42, 43, 50, 51,
52, 60, or 61.
201 Copy length is outside the range 0 to 2710.
202 Copy start position must be 1 to 2710.
203 Destination start position must be 1 to 2710.
204 Source field must be 0 to 99.
205 Copy type must be 1 (copy after rules) or 2 (copy
before rules).
206 Increment/Decrement selection must be I
(increment) or D (decrement).
207 Incrementing start position must be 0 to 2710.
208 Incrementing end position must be 0 to 2710.
209 The incrementing amount must be 0 to 999.
Chapter 9. Errors
9-5