Promise Technology Network Device EX8654 - Manual (Page 164)

SuperTrak EX Series User Manual
150
Managing Disk Arrays
Disk Array Management includes the following functions:
•
Viewing Disk Arrays (page 150)
• Locating a Disk Array (page 150)
• Creating a Disk Array (page 151)
• Deleting a Disk Array (page 157)
• Viewing Disk Array Information (page 157)
• Making Disk Array Settings (page 158)
• Creating a Logical Drive (page 159)
• Deleting a Logical Drive (page 160)
• Migrating a Disk Array (page 161)
• Rebuilding a Disk Array (page 162)
• Running PDM on a Disk Array (page 163)
• Transitioning a Disk Array (page 164)
• Preparing a Disk Array for Transport (page 164)
Viewing Disk Arrays
To view the disk arrays in this enclosure plus any expanded or cascaded
enclosures:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon.
A list of disk arrays appears in Management View.
Click the DA link to view a specific disk array. See “Viewing Disk Array
Information” on page 157.
Locating a Disk Array
Virtual or Third Party Enclosures
Support for this feature depends on how your system or enclosure was set up.
Direct-connect systems with individual LED connections and SGPIO enclosures
support individual physical drive LEDs. Other systems or enclosures might or
might not support them. See “Appendix D: LED Backplane Connections” on
page 291.
To locate a disk array in the enclosure, click the Locate DAx button. The LEDs
for the carriers holding the physical drives used by the disk array will blink for one
minute.