Panasonic WJ-SX 150A - Manual (Page 214)

42
WJ-HD300 SERIES CONTROL (WV-CU360C/CJ TERMINAL MODE)
• Available operations are in common with WJ-HD500
Series. (Refer to this unit’s operating instructions.)
This document describes operations applicable to WJ-
HD300 Series only.
• You cannot control the following functions from System
Controller WV-CU360C and WV-CU360CJ. (It is recom-
mended to use System Controller WV-CU650.)
• A – B repeat playback
• GO TO LAST
• Filtering ON/OFF
• MARK
• Text display ON/OFF
• Disk selection
• System functions
■ Controlling Digital Disk
Recorder WJ-HD300 Series
● Search Playback
You can search playback images using the ALARM
RECALL table or the SEARCH table.
Every time you press the INDEX button, the display will
change as follows.
Live image
→ Date-and-time entry form → Recording event
list
→ VMD search list → Marking list → Date-and-time
entry form...
• Date-and-time Search Playback
The recorded images can be searched for through the date
and time.
1. Enter the recorder mode. (Refer to the unit's operating
instructions.)
2. Press the INDEX button. The date-and-time entry form
will appear on the monitor.
Note: The factory default setting is the current date and
time.
3. Press the NEXT or PREV button to enter the desired
date and time. The cursor can be adjusted by moving
the joystick rightward or leftward.
Note: To exit the entry form, press the MON (ESC) but-
ton.
4. Press the PLAY or CAM (SET) button. After the search
through the date and time, the recorded image will be
played.
• Recording event search
You will select a searching filter from "TIME&DATE", "CAM-
ERA", "REC EVENT", and "TEXT". Playback pictures will be
searched by the selected searching filter.
1. Enter the recorder mode. (Refer to the unit's operating
instructions.)
2. Repeat pressing the INDEX button until the recording
event list window is displayed on the monitor.
The recorder will enter the searching mode.
Note:
• To change the monitor display to the thumbnail,
press the F1 button. (Refer to the operating instruc-
tions of recorder for details on monitor display.)
• You can display neither the text information nor
DATA COPY window.
3. Select a desired searching filter by moving the joystick
rightward or leftward.
Note: The illustration is an example in which "CAMERA"
has been selected for the searching filter.
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
START
. .
: : FEB 2 04 12 00 00 AM
UP
L R
DOWN
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
CAM REC EVT
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
TEXT
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
TIME&DATE CAMERA REC EVENT TEXT UNLOCK FILTER
TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
CAM REC EVT
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
TEXT
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
TIME&DATE CAMERA REC EVENT TEXT UNLOCK FILTER
TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100