Panasonic WJ-SX 150A - Manual (Page 219)

47
mm=Monitor No.
n=0 HDD normal/event recording sector
n=1 HDD copy sector
n=2 Disk connected to COPY 1
n=3 Disk connected to COPY 2
mm=Monitor No.
Setup control commands are available.
(Refer to WJ-SX150A Operating
Instructions.)
WJ-HD300 Series OSD dis-
play ON
(Refer to WJ-SX150A
Operating Instructions for WJ-
SX150A OSD ON/OFF.)
Item
Transmission Command
(ASCII)
Response (ASCII) Parameter (ASCII)
CMD:RmmDI ANS:RmmDI
DATA COPY window ON CMD:RmmPD ANS:RmmPD mm=Monitor No.
Setup control commands are available. (Refer
to WJ-SX150A Operating Instructions.)
List/Thumbnail CMD:RmmTN ANS:RmmTN mm=Monitor No.
Transmission command displays list or
thumbnail alternately.
Text display ON CMD:RmmDT ANS:RmmDT mm=Monitor No.
Setup control commands are available.
(Refer to WJ-SX150A Operating Instructions.)
Disk selection CMD:RmmDSn ANS:RmmDS
CMD:RmmRPn A - B repeat playback ANS:RmmRP
MARK CMD:RmmMP ANS:RmmMP mm=Monitor No.
Filtering ON/OFF CMD:RmmLTn ANS:RmmLT mm=Monitor No.
n=0 OFF
n=1 ON
GO TO LAST CMD:RmmPM ANS:RmmPM mm=Monitor No.
n=0 A - B repeat playback OFF
n=1 Set repeat start point (A point)
n=2 Set repeat end point (B point)
The following commands have been newly added. These commands are available only while Digital Disk Recorder WJ-HD300
Series are being connected to the unit.
Recorder Control