Panasonic WJ-SX 150A - Manual (Page 218)

46
mm=Monitor No.
n=0: Search playback*
n=1: Time & date search playback**
* Transmission command changes the moni-
tor display as follows.
Date-and-time entry form
→ Recording
event list
→ VMD search list → Marking list
→ Date-and-time entry form...)
** Date-and-time entry form of matrix
switcher appears.
COMMUNICATION PROTOCOL (FOR USERS OF WJ-HD300 SERIES)
WJ-HD300 SERIES CONTROL (WV-CU360C/CJ PS·DATA)
Parameter (ASCII)
Stop
Index
Multiscreen segment switch-
ing
Item
CMD:RmmMLn
(Described as
"CMD:RmmML"
in the operating instructions) ANS:RmmML mm=Monitor No.
n=0: 4 segments
n=1: 7 segments
n=2: 9 segments
n=3: 10 segments
n=4: 13 segments
n=5: 16 segments
n=skipped: Segment pattern change*
* Transmission command changes the multi-
screen segment pattern as follows.
4 (segments)
→ 7 → 9 → 10 → 13 → 16 →
4....
ANS:RmmSPn mm=Monitor No.
n=0 Stop playback
n=1 Stop recording
n=V Stop VMD search
The following commands have been described in the operating instructions of this unit (matrix switcher). However, while Digital
Disk Recorder WJ-HD300 Series are being connected to the unit, these commands will be changed as follows.
Available operations are in common with WJ-HD500 Series. (Refer to the unit's operating instructions.)
CMD:RmmSCn
(Described as
"CMD:RmmSC"
in the operating instructions) ANS: RmmSCn
Transmission Command
(ASCII)
Response (ASCII)
CMD:RmmSPn
Recorder Control