Panasonic WJ-SX 150A - Manual (Page 97)

100
(Save Exit) button
Saves the configuration and closes the Multiplexer Mode
window.
(Cancel Exit) button
Cancels the configuration and closes the Multiplexer Mode
window.
● Mux Alarm Group
This is a submenu of the Multiplexer window. In this win-
dow, up to 4 cameras are given recording priority for each
alarm input.
• Click a drop-down menu to assign the camera numbers
(1 to 16) to each alarm group (Group1 to 16). The facto-
ry default setting is same as the illustration.
• To configure Group 9 to 16, click on the Group 9 –
Group 16 tab.
(Save Exit) button
Saves the configuration and closes the Mux Alarm Group
window.
(Cancel Exit) button
Cancels the configuration and closes the Mux Alarm Group
window.
■ Multiplexer Title
● How to Display
To display this window, click on the (Multiplexer Title)
button in the main window (p. 80.)
● Parameters
The factory default settings are same as the illustration.
To edit the desired camera’s title, click on the associated
button (Cam 1 to Cam 16).
The subsequent editing procedure is the same as Camera
Title. (Refer to p.94.)
Notes:
The characters available here are the following:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
t u v w x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , -
./:;¨=Æ?oÄÜÖÆÑÃØäüöæñãø
• Up to 8 alphanumeric characters are available for the
Multiplexer board camera title.
• You cannot edit a user font character.
(Save Exit) button
Saves the configuration and closes the Multiplexer Title win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Multiplexer Title
window.
MUX