Panasonic WJ-SX 150A User Manual
Page 27
28
$4
Next button (NEXT)
Moves a tour sequence one step forward from the step
previously paused on the active monitor.
Also selects a camera. If the active monitor is in the
spot mode, press NEXT while holding down the CAM
(SET) button, to replace the currently selected camera
with the next higher-numbered camera.
During the recorder mode, this button moves the play-
back image one step forward.
$5
Previous button (PREV)
Moves a tour sequence one step backward from the
step previously paused on the active monitor.
Also selects a camera. If the active monitor is in spot
mode, press PREV while holding down the CAM (SET)
button, to replace the currently selected camera with
the next lower-numbered camera.
During the recorder mode, this button moves the play-
back image one step forward.
$6
Recorder button (RECORDER)
To enter the recorder mode, press this button. (Refer to
p. 131.)
Note:
Only one operator can enter the recorder mode
at one time.
$7
Pause button (PAUSE)
Pauses a tour sequence, and the playback of the
recorded images* that is being run on the active moni-
tor.
Also restarts the sequence from the next step forward,
or the playback of the recorded images*.
$8
Play button (PLAY)
Starts the playback of the recorded images*.
$9
Stop button (STOP)
Ends a tour sequence, or stops the playback of the
recorded images* that is being run on the active moni-
tor.
%0
Shift button (SHIFT)
To activate the alternate function of each button, press
this button, in combination with buttons associated with
special functions.
%1
On-screen Display button (OSD)
In combination with the numeric buttons, this button
toggles the currently selected display items on the
active monitor.
1:
Clock display (T&D)
2:
Camera title display (CAM ID)
3:
Event display (EVENT)
4:
Monitor status display (MON STATUS)
5:
All displays (ALL)
7:
ALARM HISTORY table (ALM H)
8:
VIDEO LOSS STATUS table (VLD H)
9:
SYSTEM STATUS table (SYS S)
%2
Setup button (SETUP)
To display the unit's SETUP MENU, press this button
while holding down the SHIFT button.
* The playback of the recorded images is possible when
a recorder is connected.
%3
Zoom wheel controller
This control is used for zooming cameras equipped
with the specific lens. Moving the control to the right will
zoom in the image. Moving the control to the left will
zoom out the image.
%4
Joystick
Use this joystick to manually operate cameras, camera
site accessories and a recorder, or to move the cursor
in SETUP MENU on the active monitor screen.
}
:
Up
{
:
Down
[
:
Left, rewind*, backward field advance*
]
:
Right, fast-forward*, forward field advance*
*Available after pressing the RECORDER button while
connecting to a recorder.
%5
Top button
Pressing this button will automatically set the lens focus
of a specified camera.