Power, Setting the timer, Convenience operation – Panasonic CS-A9CKPG User Manual

Page 42

Advertising
background image

■

Setting the Horizontal Airflow Direction

●

Notes

•

If the unit is not going to be used for an extended
period of time, turn off the main power supply. If it is
left at the ON position, approximately 2.5 W of
electricity will be used even if the indoor unit has
been turned off with the remote control.

•

If operation is stopped, then restarted immediately,
the unit will resume operation after 3 minutes.

●

Operation Details

COOL – Cooling Operation
•

To set the room temperature at your preferred cooling
comfort level.

AUTO – Automatic Operation
•

Sense indoor temperature to select the optimum
mode.

•

Temperature is not displayed on the remote control
during AUTO operation.

DRY – Soft Dry Operation
•

A very gentle Cooling Operation, prior to
dehumidification. It does not lower the room
temperature.

•

During Soft Dry operation, the indoor fan operates at
Low fan speed.

HEAT – Heating Operation
(for Heat Pump Model only)
•

Heat is obtained from outdoor air to warm up the
room. When the outdoor ambient air temperature
falls, the heating capacity of the unit might be
reduced.

•

Defrosting Operation
Depending on the outdoor temperature, the operation
occasionally stops to melt the frost on the outdoor
unit.

FAN – Air Circulation Operation
(for Cooling Model only)
•

When the room temperature reaches the set
temperature, operation commences at Low airflow
volume. It stops when the room temperature drops to
2°C below the set temperature.
(It is useful when using a heater).

MANUAL
Five stages of adjustment
can be made between
14° ~ 36°.

MANUAL
Five stages of adjustment
can be made between
0° ~ 61°.

Heat Pump Model

MANUAL
Five stages of adjustment
can be made between
14° ~ 36°.

MANUAL
Five stages of adjustment
can be made between
0° ~ 61°.

– When the discharge air

temperature is low such
as at the start of heating
operation, the air blows
in a horizontal direction.
As the temperature
rises, the hot air blows
in a downward direction.

– To stop this operation,

press MANUAL.

HEAT Operation

AUTO

COOL / DRY Operation

AUTO

Swing up/down
Automatically

36°

Swing up/down
Automatically

Move up/down
Automatically

36°

61°

COOL / DRY Operation

AUTO

FAN Operation

AUTO

■

Setting the Fan Speed
• Press

4

to select:

FAN

– Low Fan Speed

FAN

– Medium Fan Speed

FAN

– High Fan Speed

AUTO
FAN

–

Automatic Fan Speed
The speed of the indoor fan is adjusted
automatically according to the operation.
The indoor fan stops occasionally during
cooling operation.

■

Setting the Vertical Airflow Direction
• Press

5

or

6

to select:-

Cooling Model

POWER

POWER

TIMER

TIMER

QUIET

QUIET

POWER

POWER

TIMER

TIMER

QUIET

QUIET

POWERFUL

POWERFUL

POWERFUL

POWERFUL

ECONOMY

ECONOMY

ECONOMY

ECONOMY

• Adjust it manually

●

Use this air conditioner under the following
conditions:

Heat Pump Model

DBT

32

16

DBT: Dry Bulb Temp
WBT: Wet Bulb Temp

Maximum Temperature-Cooling
(Maximum Temperature-Heating)

Minimum Temperature-Cooling
(Minimum Temperature-Heating)

DBT

32

(30)

16

(16)

WBT

23
(-)

11
(-)

DBT

43

(24)

16

(-5)

WBT

26

(18)

11

(-6)

Indoor

Outdoor

(Unit in °C)

Cooling Model

DBT: Dry Bulb Temp
WBT: Wet Bulb Temp

Maximum Temperature

Minimum Temperature

WBT

23

11

DBT

43

16

WBT

26

11

Indoor

Outdoor

(Unit in °C)

SETTING THE TIMER

Ensure that the current time is correct before setting
the timer. The timer cannot be set if the time display is
flashing.

■

ON-TIMER Operation
To start the air conditioner operation automatically.
• Press

1

to set the operation.

• Press

2

to increase or decrease the time.

• Then press

3

.

• To cancel this operation, press

4

.

■

OFF-TIMER Operation
To stop the air conditioner operation automatically.
• Press

5

to set the operation.

• Press

2

to increase or decrease the time.

• Then press

3

.

• To cancel this operation, press

4

.

●

Timer Mode Operation Details
• Once the timer is set, operation will start and stop

at the same time everyday.

• When the ON-Timer is set, operation will start

before the actual set time. This is to ensure the
room temperature reaches the set temperature at
the set time.

• The current time is not displayed when the timers

are set.

• When both timers are used together, the TIMER

mode indicator on the indoor unit remains lit even
when the operation is stopped by the OFF-TIMER.

CONVENIENCE OPERATION

■

Powerful Mode Operation

To obtain the set temperature quickly.
• Press

6

.

*

Powerful mode indicator (orange) on the indoor
unit will light up.

*

Powerful mode will operate for 15 minutes only.

• To cancel this operation, press once more.

■

Economy Mode Operation

To save electrical power consumption.
Please use this mode when the room has reached
your desired temperature.
• Press

7

.

*

Economy mode indicator (green) on the indoor unit
will light up.

• Press once more to cancel this operation.

●

Economy/Powerful Mode Operation Details

• Economy and Powerful operation cannot be

selected simultaneously.

• The changes of the temperature and airflow volume

are automatic.

• The remote control display remains unchanged.
• If operation mode button is pressed, economy or

powerful operation will be cancelled.

• During FAN – Air circulation operation, the powerful

and economy operation are not available.
(for Cooling Model only)

■

Quiet Mode Operation
To provide quiet operation.
• Press

8

.

*

Quiet mode indicator on the indoor unit will light up.

• To cancel this operation, press once more.

●

Operation Details
• Air flow sound will reduce during operation.

CHECK

AUTO

AUTO HEAT

DRY FAN

COOL

FAN

AUTO

RESET CLOCK

MODE

POWERFUL

ECONOMY

FAN SPEED

AIR SWING

OFF

CANCEL

ON

SET

1

2

3

TIMER

OFF/ON

QUIET

AUTO

MANUAL

3

6

4

1

7

5

2

8

Heat Pump Model

COOL,DRY, –>15 minutes

in advance

HEAT, AUTO –>30 minutes

in advance

Cooling Model

COOL,DRY, –> 15 minutes
AUTO

in advance

Airflow

volume

Super Low

Automatic

Economy Mode

Operation

COOL / DRY

HEAT

(for Heat Pump

model only)

Temperature

0.5°C higher

than set temp.

0.5°C lower

than set temp.

Airflow

volume

Super High

Automatic

Powerful Mode

Operation

COOL / DRY

HEAT

(for Heat Pump

model only)

Temperature

3°C lower

than set temp.

3°C higher

than set temp.

42

CS-A9CKPG CU-A9CKP6G / CS-A12CKPG CU-A12CKP6G

Advertising