ZANKER ZKI1530 - Manual (Page 23)

1 2
3
Fill the salt container with
1 litre of water (only the
first operation).
4
5 6
It is normal that water overflows from the salt
container when you fill it with salt.
Make sure that there is no grain of salt outer of
the salt compartment. Salt which stays on the
tank for a while drills the tank. It is recommended to
start a washing programme immediately after you fill
the salt container. This prevents of corrosion because
of spilled salt.
When you set electronically the water softener to level
1, the salt indicator light does not stay on.
Use of rinse aid
Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1 2
M A X
1 2
3 4
+
3 4
M A X
1 2
3 4
+
5
Fill when the rinse aid in-
dicator ( B ) becomes
clear.
23