Technical data, Environment concerns, Installation – ZANKER ZKI1530 User Manual

Page 30

background image

The cleaning results are not satisfactory

There are streaks, milky spots or
a bluish coating on glasses and

• Decrease the rinse aid dosage.

Dry water drop signs on glasses
and dishes

• Increase rinse aid dosage.
• The detergent can be the cause.

Technical data


Width cm


Height cm


Depth cm


Electrical connection - Voltage -
Overall power - Fuse

Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher door.

Water supply pressure


0,5 bar (0,05 MPa)


8 bar (0,8 MPa)


Place settings


Environment concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop where
you purchased the product.

The packaging materials are environmentally friendly
and can be recycled. The plastic components are iden-
tified by markings, e.g. >PE<, >PS<, etc. Discard the
packaging materials in the applicable container at the
community waste disposal facilities.

Warning! To discard the appliance, follow the

• Pull the mains plug out of the socket.
• Cut off the mains cable and mains plug and discard


• Discard the door catch. This prevents the children

to close themselves inside the appliance and en-
danger their lives.


Warning! Make sure that mains plug is
disconnected from the mains socket during


Important! Obey the instructions in the enclosed
template to:
• Build-in the appliance.

• Install the furniture panel.
• Connect to the water supply and drain.

Install the appliance under a counter (kitchen worktop
or sink).
If a repair is necessary, the appliance must be easily
accessible for the engineer.