Nortel Networks M7410 - Manual (Page 104)

Using System features 103
P0908510 Issue 02 Enterprise Edge Feature Programming Telephone Guide
Run/Stop
ƒ•·
Run/Stop inserts a break point into a sequence of dialed numbers or characters used
for automatic dialing. This may be necessary when you are connecting to a PBX or
similar host system.
For example, you can call a company with an automated attendant that instructs you
to dial the internal number you need. You can program the company number, a Run/
Stop, then the internal number on one external autodial button. Press the autodial
button once to dial the company number. When you hear the automated attendant,
press the autodial button again to dial the internal number.
The Run/Stop symbol ( fl ) uses one of the 24 spaces in an autodial or speed dial
sequence.
You can include up to three Run/Stop commands in a dialing string. The system
ignores a fourth Run/Stop, and any digits or commands that follow it in a
programmed dialing sequence.
Wait for Dial Tone
ƒ°‚›
Wait for Dial Tone causes a sequence of numbers to pause until dial tone is present
on the line before continuing to dial. This is useful if you must dial a remote system
and then wait for dial tone from that system before dialing the rest of your number.
The Wait for Dial Tone symbol ( ‡ ) uses two of the 24 spaces in an autodial or
speed dial sequence.
Displays
Using pulse dialing for a call
If your external telephone lines use pulse dialing, you can temporarily switch to
tone dialing by pressing
£
after selecting the line. Tone dialing allows your
Enterprise Edge telephone communicate with devices and services that respond to
tone signals, such as automatic switchboards, and fax or answering machines.
Using your Enterprise Edge system from an external location
You can use the lines and some of the features of an Enterprise Edge system from
outside the system. You can do this over the public telephone network when you are
away from the office, or you can call from another system, over a private network.
You have entered a code that can be used only in a
programmed autodial or speed dial sequence, not on a call
you dial directly. Programmed Release and Run/Stop are
for use in programmed dialing sequences only. Invalid code