Nortel Networks M7410 - Manual (Page 57)

56 Forwarding your calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 02
Displays while redirecting lines
Displays while canceling redirection
You selected the intercom button as the facility on
which to place the call. Enter a line pool code or a
destination code.
Press • or ADD to begin redirection. Press £ or
REMOVE to cancel a previous redirection.
You have one external line on your telephone, but you
need a second line to perform line redirection. Redirect
your external line using a line pool as the outgoing line.
You are attempting to redirect a line and the line you
have chosen is the outgoing line you have selected as
a destination. You cannot redirect a line to itself. Select
another line.
Enter a valid line pool access code.
You have attempted to redirect a line, but someone
else has already redirected that line. Press
• or
OVERRIDE to override the previous redirection and
redirect the line as you want.
You can redirect calls only on individual lines.
Select the line that is used to redirect calls out of the
system.
Press the lines to be redirected. To undo a line
selection, press it again. Press
ALL to redirect all your
lines.
Continue to press the lines to be redirected. Press
˙ or OK when you are finished.
The line you are attempting to redirect cannot be
redirected because the hardware does not support
redirection.
Press the lines that are no longer to be redirected. The
lines light up as you press them. Once you cancel
redirection for a line you cannot restore it by pressing
the line again. Press
ALL to cancel redirection for all
your lines. When you are finished, press ˙ or
OK .
Continue to press the lines that are no longer to be
redirected. Press
˙ or OK when you are
finished.
For other displays, see Common feature displays on page 125.
Intercom
Line Redirection
QUIT
ADD REMOVE
No line to use
Outgoing line
Pool code: ___
QUIT
Redir by 221
OVERRIDE
Redirect denied
Select line out
QUIT
Select line(s)
QUIT
ALL
Select line(s)
ALL OK
Unequipped line
Select line(s)
QUIT
ALL
Select line(s)
ALL OK