Nortel Networks M7410 - Manual (Page 30)

Answering calls 29
P0908510 Issue 02 Enterprise Edge Feature Programming Telephone Guide
Turning Privacy on or off for a call
ƒ°‹
Lines in your system can be configured to have automatic privacy. If a line is not
programmed with privacy, anyone with the line assigned to their telephone can join
your call by pressing the line button. If a line is programmed with privacy, only one
person at a time can use the line.
Privacy control cannot be used on internal or conference calls.
When another telephone joins a call, the participants on the call hear a tone, and a
message appears on the Enterprise Edge display. You cannot join a call without this
tone being heard.
Creating a conference by releasing privacy
If a line is programmed with privacy, you can turn privacy off to allow another
person with the same line to join in your conversation and form a conference. All
the rules applicable to a conference apply except there is only one line in use,
instead of the normal two. This means that you cannot split a conference set up
using Privacy.
1. Press ƒ°‹ .
2. Tell the other person to press the line button and join your conversation.
Only two Enterprise Edge telephones in addition to the external caller can take part
in this kind of conference.
Making a call private
If a line is programmed not to have privacy, you can turn privacy on for a call,
preventing other people with the same line from joining your conversation.
Press
ƒ°‹
.
Checking call length using Call Duration Timer
ƒ‡‡
By pressing ƒ‡‡ , you can see how long you spent on your last call, or
how long you have been on your present call.
Displays
The display shows the last call you made, or the
current call, and the total elapsed time in minutes
and seconds.
You parked your last call. The display shows the
length of time the call was parked. You cannot see
the length of time a call was parked unless the call
is active at your telephone or has just been
released by your telephone.
221 02:47
Line061 01:45