Nortel Networks M7410 - Manual (Page 27)

26 Answering calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 02
Listening to a call as a group
ƒ°‚¤
To allow people in your office to listen in on a call using Group Listening, press
ƒ°‚¤ .
You hear the caller’s voice through your telephone’s speaker. Continue to speak to
the caller through the telephone receiver. Your telephone’s microphone is off, so
the caller does not hear people in your office.
Canceling Group Listening
ƒ£°‚¤
Group Listening is canceled automatically when you hang up or when you press
ƒ£°‚¤
.
Using Handsfree/Mute
The ability to use Handsfree must be turned on or off for each telephone. The type
of Handsfree can be changed. See
Changing Handsfree for a telephone on page 28.
You must turn on Handsfree for a telephone to be able to use a headset.
Answering calls without lifting the receiver
1. Press the line button for the ringing call. (This step is not necessary if you
have a prime line assigned to your telephone.)
2. Press © . The telephone’s internal microphone and speaker are
automatically turned on.
Handsfree is not available for a M7100 telephone.
Tip
Keep the receiver away from the speaker, or you may hear feedback. The
higher the volume, the more the feedback. Press ® to prevent feedback
when hanging up.
Tip
Direct your voice toward the telephone. The closer you are to the telephone,
the easier it is for the microphone to transmit your voice clearly to your
listener.