Nortel Networks M7410 - Manual (Page 32)

P0908510 Issue 02 Enterprise Edge Feature Programming Telephone Guide
Making calls
There are many ways to make a call, depending on the programming and the type
of call, as follows:
• Pick up the receiver and dial. The Enterprise Edge system supports three
methods of dialing. See
Changing how you dial your calls on page 34.
• Pick up the receiver, press a line button, and dial (if the call is not on your prime
line).
• Press © and dial (to talk without using the receiver). See Using
Handsfree/Mute on page 26.
• Press © , press a line button, and dial (to talk without the receiver and if
the call is not on your prime line).
• Press a line button and dial (to talk without the receiver and if Automatic
Handsfree is assigned to your telephone).
• Use one of the features that make dialing easier. See Time savers for making
calls on page 37.
Displays
The telephone you have called has no internal lines
available. Press
LATER to use the Ring Again or
Message features or press PRIORITY to make a
priority call.
You are dialing using Pre-dial. To erase an incorrect
digit, press the left end of
√ or BKSP . When
the number is complete, select a line or lift the receiver.
This prompt remains on your display as long as you
are on a call you have dialed. To transfer the call, press
TRANSFER .
Your telephone is already connected to the telephone
you are trying to call. Check your active line buttons,
and return to that call.
Wait for the telephone to be answered. If no one
answers, press
LATER to use the Ring Again (page 36)
or Message (page 61) feature, or press PRIORITY to
make a priority call.
You cannot use Ring Again on your current call. You
can only use Ring Again while you have a busy signal
on an internal call or line pool request or while an
internal call is ringing.
The telephone you are calling has Do Not Disturb
turned on. Press
LATER to use the Ring Again or
Messages features, or press PRIORITY to make a
priority call.
You have dialed a number, but the least expensive
route that the system is programmed to use is busy.
Unless you release the call, it goes through on a more
expensive route.
3
221 busy
PRIORITY
LATER
9__
QUIT
BKSP
95551234
TRANSFER
Already joined
Calling 221
PRIORITY
LATER
Can't ring again
Do not disturb
PRIORITY
LATER
Expensive route