Nortel Networks M7410 - Manual (Page 65)

64 Communicating in the office
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 02
Removing items from your message list using an analog telephone connected to
an ASM
To remove both internal and external messages on an analog telephone connected
to an ASM
• Press
˚£flfi
to invoke the Cancel Message Waiting feature.
On analog telephones connected to an ASM, the Cancel Message Waiting feature
cancels the oldest message received. The system no longer provides either a
Stuttered Dial Tone or a Message Waiting Lamp if there are no messages pending.
Viewing messages you have sent
ƒ⁄
On a telephone with a two-line display, you can view the messages you have sent.
1. Press
ƒ⁄
.
2. Press SHOW to display your first sent message.
3. Press NEXT to move through your sent messages.
Displays
You have entered an invalid number when attempting to cancel a
message.
You have cleared an external message from your message waiting
list. The message itself exists in your message center until you erase
it there.
You are trying to call from your message waiting list. The line that
you are trying to use is being used by the identified Enterprise Edge
user.
You are viewing your message list. The display shows the number
and name of the line that was used for your message.
You have tried to send a message to an invalid internal number or to
a telephone that is out of service.
SHOW appears only if you have outstanding messages. Press SHOW
to review messages you have sent. Press ADD to send a new
message.
Enter the internal number of the telephone to which you want to send
a message.
You have one or more messages and one or more new Call Logs.
Press
ƒ°‚fl to change the first line of the display to
the current time and date.
Cancel denied
Cleared>LINENAM
NEXT
In use: 221
L061:LINENAMVMsg
NEXT
CALL CLEAR
Message denied
Message list
SHOW
ADD EXIT
Message to:
Messages & Calls
MSG
CALLS