Nortel Networks M7410 - Manual (Page 88)

Telephone features 87
P0908510 Issue 02 Enterprise Edge Feature Programming Telephone Guide
Telephone names and line names can contain both letters and numbers, but cannot
be longer than seven characters. You cannot use the # and * symbols.
Moving telephones
If automatic telephone relocation is enabled in programming by your installer, you
can move your telephone from one Enterprise Edge jack to another without losing
any of its custom programming.
Stopping calls from ringing at your telephone using Do Not Disturb
(DND)
ƒ°fi
Stopping calls
Press ƒ°fi to stop calls from ringing at your telephone.
Only priority calls ring at your telephone. A line button flashes when you receive a
call, but the call does not ring.
Refusing to answer a call
While you are on a call, you can refuse to answer a second call (including a priority
call).
Press
ƒ°fi
while your telephone is ringing.
Canceling Do Not Disturb
ƒ£°fi
Press
ƒ£°fi
.
Tip
You can give the same name to two or more telephones, or to a telephone and
a line in your system. To avoid confusion, avoid such duplication. Use
initials, abbreviations, or even nicknames to give each telephone a unique
name.
If automatic telephone relocation is turned on, the name and internal number
of a telephone are saved if the telephone is moved within your system.
You may be required by law to report any telephone moves to your local
telecommunications carrier or 911 service provider. For further details,
consult your local carrier, your local 911 service provider, and/or your local
telecommunications service provider.