Nortel Networks M7410 - Manual (Page 91)

90 ISDN PRI
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 02
Your Enterprise Edge system sends the Business Name concatenated with the set
name on an outgoing call but only after the Business Name has been programmed.
The available features include:
• Receiving Connected Name
• Receiving Calling Name
• Receiving Redirected Name
• Sending Connected Name
• Sending Calling Party Name
Consult your customer service representative to determine which of these features
is compatible with your service provider.
Name and number blocking for PRI
When activated, ƒ°⁄· allows you to block the outgoing name
and/or number on a per-call basis. Name and number blocking can be used with an
Enterprise Edge set.
Consult your customer service representative to determine whether or not this
feature is compatible with your provider.
Emergency 911 Dialing
Enterprise Edge with the ISDN PRI feature is capable of transmitting the telephone
number and internal extension number of a calling station dialing 911 to the Public
Switched Telephone Network. State and local requirements for support of
Emergency 911 Dialing service by Customer Premises Equipment vary. Consult
your local telecommunications service provider regarding compliance with
applicable laws and regulations.
If transmission of internal extension numbers is not required or desired, then it is
recommended that you maintain a site map or location directory that allows
emergency personnel to rapidly locate an Enterprise Edge set given its DID number.
This list should be kept up to date and readily available, and can be included in the
Programming Record.
2-way DID
With PRI the same lines can be used for receiving direct inward dialing (DID) and
for making direct outward dialing (DOD) calls.
The dialing plan configured by your customer service representative determines
how calls are routed.
Consult your customer service representative to determine whether or not this
feature is compatible with your service provider.