Nortel Networks M7410 - Manual (Page 25)

24 Answering calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 02
2. Press
®
. The call is disconnected.
3. Press the line button of the held call to speak to the remaining person.
On a M7100 telephone:
1. Press
ƒ£‹
, to place one caller on hold. Press
˙
again, to put
the caller you want to keep on hold.
2. Press ® . The call is disconnected.
3. Press
˙
to speak to the remaining party.
Independently holding two calls
For all Enterprise Edge telephones except the M7100 telephone, you can put the two
people in a conference call on hold independently so that they cannot talk to each
other.
1. Press the line button of one person. The other person is automatically put on
hold.
2. Press
˙
. The second person is put on hold.
You can re-establish the conference.
3. Take one call off hold.
4. Press
ƒ‹
.
5. Take the other call off hold.
Putting a conference on hold
You can put a conference on hold, allowing the other two people to continue
speaking to each other by pressing
˙
.
You can reconnect to the conference by pressing either of the held line buttons. For
the M7100 telephone, press
˙
.
Splitting a conference
You can talk with one person while the other person is on hold.
On a M7208, M7310 or M7324 telephone
• Press the line button of the person to whom you want to speak. The other person
is automatically put on hold.