Nortel Networks Call Center Telephone - Manual (Page 124)

124 Chapter 9 Intelligent Overflow Routing
N0025637 01
Changing and viewing Overflow rules
1 Press ≤·°‹.
Enter the Call Center Administrator Mailbox number and
password,
and then press OK.
2 Press OTHR.
3 Press CC.
4 Press SKILL.
5 Enter the number of the skillset you want to change and press OK.
6 The display shows whether the skillset is enabled or disabled.
You must disable the skillset before you make changes to it. To
disable the skillset Press CHNG and press NEXT to continue.
7 Press NEXT to continue.
8 Press NEXT to continue.
9 Press OTHR.
10 Press OVFLW.
11 Press CHNG.
12 The first Overflow rule, shown here as rule 1, is displayed.
If you want to change another rule, press NEXT until you see the
display in step 17.
Press CHANGE if you want to change the mode of the Overflow rule
(mode is either Day, Night or 24 Hour)
or
press NEXT to continue.
13 Press CHANGE if you want to change the time of the Overflow rule
or
press NEXT to continue.
If you do not have a time set for this Overflow rule this display
does not appear.
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Admin
GLIST CCR CC
CC Admin
AGENT SKILL OTHR
Skillset:
RETRY QUIT OK
Status: xxxxxxx
CHNG NEXT
Skill mbox pswd
RESET NEXT
Skill mbox pswd
RESET NEXT
Skillset Admin
PARM AGENT OTHR
Skillset Admin
ROUTE OVFLW UNCF
Overflow rules
ADD CHNG DEL
1: mode
CHANGE NEXT
1: time
CHANGE NEXT