Nortel Networks Call Center Telephone - Manual (Page 86)

86 Chapter 7 Off-premise Message Notification
N0025637 01
To set up Off-premise Message Notification to more than one
destination
You can receive notification of a message at a maximum of five different destination numbers. The
following steps show you how to enter a telephone number destination and then add a pager
destination for the first time.
1 Press ≤ ·°⁄.
Follow the voice prompts or the display button options to open the
skillset mailbox.
2 If you use the CallPilot interface:
• Press °fi to open the Mailbox Tools
• Press NOTIF or ¤ to open the Off-premise Message
Notification menu
• Go to step 3
If you use the Norstar Voice Mail interface:
• Press ADMIN or °
• Press fl to open the Off-premise Message Notification
menu
• Go to step 3
3 Press ADMIN or ⁄ to set up Off-premise Message Notification.
4 Press PHONE or ⁄ to choose a destination telephone number.
5 Enter the destination telephone number and press OK or £. The
destination telephone number cannot be longer than 30 digits.
6 Press OK or £ to accept the destination telephone number,
represented by <x>
or
press ADD or ¤ to add special characters and use your dialpad or
follow the voice prompts to add characters.
7 Enter the start time for Off-premise Message Notification. This is a
four-digit field. Any single-digit hour and minute must be preceded
by a zero.
8 Press AM or ⁄
or
PM or ¤.
Msg notify
ADMIN SELECT
Destination:
PHONE EXT PAGER
Ph:
RETRY OK
<x>
ADD OK
Start: hhmm:
RETRY OK
<start time>
RETRY AM PM