Nortel Networks Call Center Telephone - Manual (Page 89)

Chapter 7 Off-premise Message Notification 89
Call Center Telephone Administration Guide
Changing Off-premise Message Notification
You can change the parameters and destinations for Off-Premise Message Notification. Refer to
“Off-premise Message Notification parameters” on page 79 for more information about
parameters.
If you want to change the time or message type parameters, use the procedure “To change the time
range or type of message parameters” on page 89
If you want to change the destination type refer to the procedure for the destination type.
To change the time range or type of message parameters
To change the destination type refer to
from a telephone to an extension, pager or another telephone
number page 91
from a pager to an extension or telephone page 93
from a telephone or extension to a pager page 95
1 Press ≤·°⁄.
Follow the voice prompts or the display button options on your
telephone to open the skillset mailbox.
2 If you use the CallPilot interface:
• Press °fi to open the Mailbox Tools
• Press NOTIF or ¤ to open the Off-premise Message
Notification menu
• Go to step 3
If you use the Norstar Voice Mail interface:
• Press ADMIN or °
• Press fl to open the Off-premise Message Notification
menu
• Go to step 3
3 Press ADMIN or ⁄ to set up Off-premise Message Notification.
4 Press NEXT.
If you want to change the destination type refer to
“To change the
destination type” on page 89 for the appropriate procedure.
5 Press NO or £ to continue.
Msg notify
ADMIN SELECT
Notify:<x>
CHNG NEXT
More dest?
YES NO