Quantum Instruments Cascade Laser Starter Kit - Manual (Page 15)

Starter Kit Instruction Manual Description 14
4.3.3 Specifications
Far field elliptical (FWHM):
Vertical: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 ◦
Horizontal: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 ◦
Operating temperature:
Might vary for each laser, but generally located in the range from -30 ◦ C to +30 ◦ C
Caution !
Before operating the laser at different temperature than specified in the datasheet, please contact
Alpes Lasers SA or a representative. Damages resulting from a non-respect of temperature operat-
ing range without approval from Alpes Lasers SA will led to a loss of warranty.
Submount size :
ST mounting: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 x 7 x 2 mm 3
NS mounting: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 x 7 x 2.5(top of the ceramic pads) mm 3
Typical laser position:
Over the submount, centered laterally: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2 mm
Inside the sub-mount top surface: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03 mm
Laser emitting facet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.005 - 0.030 x 0.004 mm 2