Telenetics 56 User Manual
Page 112
AT Commands
Page 104
:E - Compromise Equalizer Enable Command
This command is included for compatibility only and has no effect other than returning a
result code.
Syntax
:E<value>
Defined Value
<value> Decimal number corresponding to the selected option.
0
:E0
command.
1
:E1
command.
.
30
@M30
command.
Result Codes
OK 0 or 1.
ERROR Otherwise.
FastConnect Commands
$F – FastConnect Control
This command allows configuring of the client modem to connect to a central site modem
that supports non-standard V.22 and V.22bis FastConnect protocols.
Syntax
$F<n>
Defined Value
<n> Decimal number which specifies the initial requested mode of
operation when the modem is operating as the originator. The
options are:
0 Normal connection (Default)
1 FastConnect without answer tone
2
Reserved
3 FastConnect with answer tone
Result Codes
OK 0 or 1.
ERROR Otherwise.